The Vitalis Thermal is a thermally comforted wetsuit for open water swimmers. It combines specific technologies for heat retention such as Thermal X technology and sealing technologies such as a second layer of “batwing” neoprene, which prevents water from entering the zipper and neck area. The high-thickness panels give the swimmer excellent buoyancy which helps them conserve energy during cold weather sessions. 

Characteristics

Thermal Comfort :

The excellent thermal properties of this wetsuit were achieved with its construction of up to 5 mm-thick panels together with the Thermal X inner lining. In addition, its "Batwing" hood prevents the entry of cold water through the neck and zipper areas, for increased conservation of body heat.

Elasticity: 

39+ and 39FS technologies are incorporated in the shoulders and underarms to improve the elasticity of this wetsuit.

High and Neutral Buoyancy: 

The high-thickness panels located in the torso provide a high level of buoyancy, providing more safety in open water. In addition, thanks to its construction, it has a neutral buoyancy level.

Comfort:

The Thermal X inner fabric is soft and comfortable, providing great comfort when swimming in cold waters.

Composition:

Neoprene : 95 %, Polyamide (Nylon) : 5 % 

Care instructions

Cleaning

Neoprene can be damaged by excess salt or other chemicals such as chlorine if used in swimming pools. We recommend washing your wetsuit with plenty of water after each use. A small amount of neutral pH soap can be used and then rinsed out afterwards.

Once clean, make sure prevent it from holding onto too much moisture. Air dry it outside or in a ventilated indoor space, somewhere without direct exposure to sunlight as this can damage the materials.

Storage

Storing your wetsuit properly keeps the materials and seams from creasing and being stretched for long periods of time. It also prevents the material from wrinkling, which can affect both the wetsuit's durability and appearance.

The best way to store a wetsuit is to hang it draped over a hanger from its waist, so that the most delicate areas such as the shoulders and arms do not have any kind of tension on them.

For wetsuits with very flexible shoulders (Apex Flex or Apex Flow), it is important not to place them on a hanger from the shoulder area, as this will degrade the elasticity over time. For the rest of the models, a wide hanger can be used, as long as the wetsuit is not strained in the shoulder or neck area.

Recommendations for use

1) If your suit has Velcro, avoid contact between the Velcro and the inner lining of the wetsuit, as it will damage the fibers in the material. Keep the Velcro covered with the provided fabric patch or make sure that the Velcro is closed, so that the rough part of the Velcro does not damage the inside of your suit.

2) For all suits, especially those made with neoprene, be careful not to damage the neoprene material with your nails when putting on or taking off the suit, as this type of damage is not covered by our warranty policy.

3) Triathlon and open water suits have been designed specifically for swimming. We cannot guarantee correct functioning of the wetsuits for other activities. Any damage to the wetsuit resulting from use in activities other than swimming is not covered by our warranty policy.

4) Avoid leaning on or coming into contact with any surfaces (especially rough ones) while wearing your wetsuit.

Techical info

Felxibility

39+ and 39FS technologies are incorporated in the shoulders and underarms to improve the elasticity of this wetsuit

39+

Yamamoto 39 neoprene is combined with the high-elasticity Infinity Skin 2 lining and SCS surface coating. The smooth finish acheived with the SCS coating reduces resistance and friction in the water, improving hydrodynamics and increasing speed.

39FS

Elasticity, maximum flexibility and total freedom of movement are brought together thanks to the combination of Yamamoto 39 neoprene, Infinity Skin 2 lining and Smoothskin surface finish. With this combination, the open water swimmer will use 35% less force in fast movements and short strokes, while slower, wider movements will require 45% less force than with any other conventional wetsuit.

 V FIT

Orca women's wetsuits are designed with patterns specific to the female body, which improves both their performance and comfort. A better fit allows the materials to function in their optimal elasticity ranges and as the wetsuit fits closer to the skin, water is prevented from entering, improving overall thermal insulation and hydrodynamics.

Buoyancy 

Specific technologies have been applied to this wetsuit to enhance its buoyancy 

39X

In the torso, Yamamoto 39 technology, which is up to 4,5 mm thick, provides maximum thermal insulation where it is needed most, without affecting the positioning of the swimmer or restricting movement. This material provides 84,5% more insulation compared to not wearing a wetsuit. This high-performance Thermal X inner lining retains heat more efficiently than other conventional inner fabrics. It is also comfortable and soft to the touch.

Hydrodynamics

Its surface treatments and perfect fit, thanks to the suit's pattern and materials, enhance the hydrodynamic properties of the wetsuit 

39+

Yamamoto 39 neoprene is combined with the high-elasticity Infinity Skin 2 lining and SCS surface coating. The smooth finish acheived with the SCS coating reduces resistance and friction in the water, improving hydrodynamics and increasing speed.

Thermal insulation

The excellent thermal properties of this wetsuit were achieved with its construction of up to 4,5 mm-thick panels together with the Thermal X inner lining. In addition, its Batwing hood prevents the entry of cold water through the neck and zipper areas, for increased conservation of body heat.

YKK10

YKK-10 zippers are high-performance and durable features. The sturdiness of these zippers gives them a long service life and they are of such high quality that they prevent water from flowing through the wetsuit while swimming.

Batwing

YKK-10 zippers are high-performance and durable features. The sturdiness of these zippers gives them a long service life and they are of such high quality that they prevent water from flowing through the wetsuit while swimming.

39x

In the torso, Yamamoto 39 technology, which is up to 4,5 mm thick, provides maximum thermal insulation where it is needed most, without affecting the positioning of the swimmer or restricting movement. This material provides 84,5% more insulation compared to not wearing a wetsuit. This high-performance Thermal X inner lining retains heat more efficiently than other conventional inner fabrics. It is also comfortable and soft to the touch.

USC

Laser cutting in the neck area combined with the Hydrolite inner lining allows the wetsuit to seal to the body and prevents chafing. This combination and seal prevent water from flowing inside the suit, improving both thermal insulation and hydrodynamics for the swimmer.